Preventative maintenance is the single most important step you can take to prolong the life and efficiency of your unit
and prevent minor problems from being major ones.

For $139, one of our qualified Kansas City HVAC technicians will inspect and clean your cooling unit in the spring
and your furnace in the fall. During our thorough Clean and Check, these are the services you can expect to receive:

Cooling System
  • Lubricate blower and bearing
  • Check belt condition and tension
  • Check filters
  • Set dampers
  • Check fan speed
  • Turn off humidifier/Close damper
  • Clean condensate drain
  • Check blower rotation
  • Check amp draw of motor
  • Check thermostat
  • Clean and check condenser
  • Check operating pressure
  • Check ambient temperature
  • Check suction line temperature
  • Check refrigerant charge
  • Check all safety controls
  • Check contactors and relays
  • Check start and run capacitors
  • Check all wiring connections
  • Check compressor
  • Check condenser fan motor
  • Check rain and dryer shields
  • Check temp drop across coil
Heating System
  • Check and clean burners
  • Lubricate motor
  • Clean pilot
  • Check thermostat
  • Check heat anticipator
  • Inspect flue pipes
  • Oil fan and blower
  • Inspect belts and tension
  • Inspect heat exchanger
  • Check filters
  • Check safety limit switch
  • Check pilot safety
  • Check roll out safety switch
  • Check pressure switches
  • Check gas pressure
  • Check furnace performance
  • Test for carbon monoxide